Ferrousalloy 3D Printing Powder Zsx Stainless Steel Powder

• Type: Alloy Steel Powder
• Standard: ASTM, JIS, GB
• Composition: Ferrous Steel Scrap
• Technique: 3D Printing
• Shape: 3D Printing Powder
• Surface Treatment: Polished
• Model NO.: ZSX (CX)
• Application: Tool Steel Bar
• Main Products: Zsx
• Oxygen Content: ≤500ppm
• Nitrogen Content: ≤70ppm
• Compressive Strength /MPa: 1600±50
• Yield Strength /MPa: 1500±50
• Elongation /%: 8±2
• Hardness /HRC: 48-52
• Transport Package: III
• Specification: ZSX
• Trademark: Fitech
• Origin: China

Product Description

Features

H13 is a hot work die steel, which is formed by adding alloying elements on the basis of carbon steel, implementing the standard GB/T1299-2014. Unified digital code T23353; Grade 4Cr5MoSiV1. At medium temperature (~600°), the overall performance is good, the hardenability is high (can be hardened in the air), the heat treatment deformation rate is low, and the performance and service life are higher than 3Cr2W8V.

Chemical Component	Fe	Ni	Cr	Mo	C	Al	Si
	surplus	8.4-10.0	11.0-13.0	1.1-1.7	≤ 0.05	1.2-2.0	≤ 0.4
	Mn	P	S	O	N
	≤ 0.4	≤ 0.015	≤ 0.015	≤ 0.03	≤ 0.02

 

Mechanical Property		Hardness/HRC:	Compressive Strength /MPa	Elongation/%
	Sedimentary state	34-38	≥ 1100	≥ 15.0
	Heat treated state	48-52	≥ 1650	≥ 10.0

 

Main chemical composition		Oxygen and nitrogen content/Mechanical properties (Heat treatment)
Fe:surplus	Cr:11.0-13.0	Oxygen content:≤500ppm	Nitrogen content:≤70ppm
Ni:8.4-10.0	Mo:1.10-1.70	Hardness/HRC:48-52	Compressive Strength /MPa:1600±50
Al:1.2-2.0		Yield strength /MPa:1500±50	Elongation /%:8±2

Application

The use and 9CRWMN die steel are basically the same, but because of its higher vanadium content, the medium temperature (600 degrees) performance is better than 4Cr5MoSiV steel, which is a representative steel with a wide range of uses in hot work die steel.
H13 die steel is used to manufacture forging dies, hot extrusion dies and precision forging dies with large impact loads; Aluminum, copper and their alloys die casting.

Injection mold parts

Anhui Fitech Material Co., Ltd. is a high-tech Manufacturer and ISO 14001:2015 environmental management system, ISO 9001:2015 quality management system ,ISO 45001 occupational health and safety certification certified company who is known as ''One Stop Advanced Materials Provider'' in China, concentrated on providing high-purity metals and high-quality chemical raw materials for high-tech enterprises and research institutes. We have cooperated with a number of domestic and foreign research institutes to jointly develop new products and to improve product processing system.
 

FAQs

Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.